Re: [FWDLK] 413 Rod Bearings

[William Huff <whuff@xxxxxxxxxx>]

If you are talking about the little notch opposite the locating tabs, 
I haven't seen those on bearings for some time.  If the rods have the 
notch in them, I just file an opening in the bearing shell.  I don't 
think the post 60s engines had rods with those notches.

Bill Huff


At 1/24/201006:59 AM, ajl wrote:
> Hello;
>
> I am in the process of putting a 413 back together, polished crank 
> etc.. taking my time. I purchased a rebuiliders kit has Clevite 
> bearings. I have a question about the rod bearings. My originals top 
> and bottom have a half moon when put together forms a circle, this 
> circle is for oil flow around the rod bearings. The new Clevite rod 
> bearings do not have this setup for oil flow. Does anyone know of a 
> brand that does?
>
> A picture of the two bearings, old and new, can be found at 
> www.myimperials.com/bearings
>
>
> Thanks;
>
> Anthony
>
> *************************************************************
>
> To unsubscribe or set your subscription options, please go to
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1