|
Huge difference, '55 is six volt, must have heavier
wire, rookie move to think less voltage requires lighter wires. That plus
the '57-'59 was a different body style, so it wouldn't have the same things in
the same places.
Fortunately haven't had to replace a harness.
Isn't there a place in Rhode Island that makes them to order?
--Roger van Hoy
----- Original Message -----
Sent: Saturday, February 13, 2010 11:47
AM
Subject: Re: [FWDLK] Wiring Harness
I'm not sure if there is any real difference between '55 and
'57-59 harness'.
If not, a good source is Greg Leggatt.
He offers:
57-59 Plymouth and Dodge
57-66 Chrysler and 57-65 Imperial
These are hand made with original type fasteners and wires, I
think.
Call and ask if he can help you in your application. Anyone else in the
ranges above, make note and save this as a resource.
Top quality harness' and good service. Contacts are:
Greg Leggatt
8738 County Road 2,
Napanee, Ontario Canada K7R 3L1
613-354-2712
Ray
On Feb 13, 2010, at 12:39 PM, Mike & Sharon Higgins wrote:
I don't know quite where to look. I need a
replacement harness for my 1955 Belvedere dashboard. The original wiring
is the old cloth wrapped wires that have deteriorated and are shorting against
each other. The cloth is so fragile that the more I work to tape or
repair it, the more it falls apart. Summit has only late model stuff,
and another has only 20's and 30's wiring. Is it "Year
One?"
Mike Higgins
1955 Belvedere Sport Coupe
*************************************************************
To unsubscribe or set your subscription options,
please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
*************************************************************
To unsubscribe or set your subscription options,
please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
No virus found in this incoming message.
Checked by AVG -
www.avg.com
Version: 8.5.435 / Virus Database: 271.1.1/2680 - Release
Date: 02/10/10 19:38:00
*************************************************************
To unsubscribe or set your subscription options,
please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
| 
Back to the Home of the Forward Look Network