Re: [FWDLK] Exhaust manifold paint

[debenson2 <debensonii@xxxxxxxxxxx>]

They were still on the engine, used POR15 marine clean and wire brushed them and painted on two coats by brush....been four years now and they still look great.

----- Original Message -----

From: Ron Waters

To: debenson2 ; L-FORWARDLOOK@xxxxxxxxxxxxx

Sent: Tuesday, May 04, 2010 8:52 PM

Subject: Re: [FWDLK] Exhaust manifold paint

What procedure did you go thru before coating the manifolds ? And how long has it been since you used the manifold paint ? Is any rust coming thru ?

 

I sandblasted mine, then painted with the Eastwood stuff. Rust was visible within six months. Then I brought them to a high temp coating place,where they put some type of ceramic type coating on. Mounted these on the car. But again have some rust coming through.

 

Ron

----- Original Message -----

From: debenson2

To: L-FORWARDLOOK@xxxxxxxxxxxxx

Sent: Tuesday, May 04, 2010 9:41 PM

Subject: Re: [FWDLK] Exhaust manifold paint

I use the POR15 manifold paint...goes on easy brush on, and lasts looks great.

----- Original Message -----

From: Nick Sperduto

To: L-FORWARDLOOK@xxxxxxxxxxxxx

Sent: Tuesday, May 04, 2010 8:25 PM

Subject: [FWDLK] Exhaust manifold paint

What are you guys using to paint your exhaust manifolds. (for my 56 plym, v8)

I was going to get some eastwood gray high temp, but the website says it's on back order until May 18th. Don't really feel like waiting that long for it.

 

Nick

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1