I had my wheel rims powder coated and the powder coat definitely did chip
off where the sharp mounting clips contacted.
The 6 inch rims that I have since installed, I painted this time round
because I figured it couldn't be any worse than the damage caused to the
powder coated finish.
Glenn.
-----Original Message-----
From: Forward Look Mopar Discussion List
[mailto:L-FORWARDLOOK@xxxxxxxxxxxxx] On Behalf Of 57superd500@xxxxxxxxxxxxxx
Sent: Wednesday, October 12, 2011 6:13 PM
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: Re: [FWDLK] Is powdercoating a good idea on/for FWDLK wheels?
The Wheel Covers do not chip off the PC.
Mounting doesn't differ, but I do recall some balance weights coming
of pretty soon on one car.
Jim, The Netherlands.
Quoting Eastern Sierra Adjustment Svc <esierraadj@xxxxxxxxxxx>:
> Apparently, you haven't rolled-off any wheel covers, but do
> you get to do much spirited cornering, in NoEur driving?
>
> Do the wheel covers chip-off the PC, like they do, with painted
> wheels?
>
> Is a PC coated wheel more difficult to mount & balance than
> a painted one?
>
> Neil Vedder
>
>
>
> Jim Hoekendijk wrote:
>> I did both my cars and never regretted it!
>>
>> -----Oorspronkelijk bericht-----
>> Van: Forward Look Mopar Discussion List
[mailto:L-FORWARDLOOK@xxxxxxxxxxxxx]
>> Namens Eastern Sierra Adjustment Svc
>> Verzonden: dinsdag 11 oktober 2011 20:08
>> Aan: L-FORWARDLOOK@xxxxxxxxxxxxx
>> Onderwerp: [FWDLK] Is powdercoating a good idea on/for FWDLK wheels?
>>
>> Pros/Cons?
>>
>> I know that PC is great on non-touched trim-type items, but on wheels,
>> that are subject to wheel cover install/removal, and road hazards?
>>
>>
>> Neil Vedder
>>
>> *************************************************************
>>
>> To unsubscribe or set your subscription options, please go to
>> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
>>
>>
>>
>
> *************************************************************
>
> To unsubscribe or set your subscription options, please go to
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.
*************************************************************
To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
*************************************************************
To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
|
|
Back to the Home of the Forward Look Network