These clocks are easy to repair, just clean and reassemble. They are actually a clockwork clock, with a solenoid winding it. Points are closed, power activates the solenoid to pull the ratchet up. Ratchet starts back down, making the clock "Tic-Tok", and when the ratchet gets to the bottom, it closes the points again and it starts all over again. About every 2 minutes as I recall. So, to repair, carefully bend the tabs up and remove the cover. Using an emory board or such like, clean the points. That is the repair. Other than cleaning, since you are there. Points get dirty and don't pass the current, so the clock stops. Adjustments are also easy, just takes time. If its slow, you adjust it up one 12 hours day, If fast, you turn it back a day. This is for each minute it is fast or slow. Once adjusted, it is accurate. It's been Decades since I did this repair on many clocks, so I may be a little fuzzy....... Ray On Tue, Feb 7, 2017 at 12:35 PM, Richard Woodside <rwoodside@xxxxxxxxxx> wrote:
-- Ray Jones. Y'all come on down an see us. Ya hear?
************************************************************* To unsubscribe or set your subscription options,
please go to Help The Forward Look with every Amazon purchase by clicking here!
|