Gloria, The swap you are asking about won't work because the bolt pattern on the small-block series engines, 273, 318, 340, and 360 is different from the big-blocks, 361, 383, 426, 440. Therefore, even though both series engines use the 727 transmission, it takes a different transmission case to fit the different engines. Otherwise, pickup and car transmissions from similar years and engine sizes will bolt in interchangably Another thing to watch for, even if both the years mentioned were to fit the same engine, the engines built in 1971 and earlier had a forged steel crankshaft and in 1972 or 1973 they were phased out and started using a cast crank, which required external balance weight added to both the harmonic balancer on the front of the crankshaft and the transmission torque converter. Also, starting in the later 1970s, the transmissions had part-throttle downshift, which required a different converter. Best to find the correct transmission. Good Luck, Okie Bob Gloria Moon <agmoon@xxxxxxxxx> wrote: Hi All, Anybody ever swapped a 727 Torqueflite automatic transmission between a Dodge truck and a Chrysler car? Like a 1980 to 1987 or so full sized Dodge 150 pickup truck with 360 engine to like a 1969 to 1971 383 or 440 powered 300 or NY'er (or other Mopar)? Will it work at all? If so are there any major changes required? We'd appreciate any advice from the wise. Please respond to agmoon@xxxxxxxxx See Ya! Allan and Gloria Moon [Non-text portions of this message have been removed] To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm --------------------------------- Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. --------------------------------- Do you Yahoo!? Yahoo! Small Business $15K Web Design Giveaway - Enter today [Non-text portions of this message have been removed] To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/