Re: [Chrysler300] VIN Nameplate

["Don Verity" <d.verity@xxxx>]

Up through at least 64 the vin tag was spot welded as Mike noted. It's not
that good of a weld as they appear to be welded at the edge of two holes in
the plate and body. I've seen a few fall off because of rust. As far as
removing the tag goes, I would leave it on and paint around it.
300ly,
Don
----- Original Message -----
From: <MJMLandDev@xxxx>
To: <moparmike@xxxx>; <thomassenp@xxxx>;
<chrysler300@xxxxxxxxxxxxxxx>
Sent: Tuesday, March 12, 2002 9:01 PM
Subject: Re: [Chrysler300] VIN Nameplate


> Are the VIN tags spot welded to the car? My H does not have any rivets.
>
> Mike Meyer
>
>
> [Non-text portions of this message have been removed]
>
>
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm
>
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>