Re: [Chrysler300] Rust treatment

[Ray Jones <hurst300@xxxx>]

Hi; Whatever you do, PAINT the area. Use any color (try to get something
close) paint to cover the primer. Leaving it just in primer will promote
rust under the surface, I've found. Primer is porious
Ray Jones

> From: Jonathan Sacks <jwsacks@xxxx>
> Date: Tue, 28 May 2002 09:16:52 -0700 (PDT)
> To: Chrysler 300 Email Network <Chrysler300@xxxxxxxxxxxxxxx>
> Subject: [Chrysler300] Rust treatment
> 
> Hi all, 
> 
> Quick question about dealing with rust. I'm about to
> do some sanding etc. to tackle some rust spots, and I
> was wondering if the club had any tips at all about
> taking care of rust? I've learned always go to the
> club first before doing anything. Chances are someone
> has a tip to make the job a easier or better. So
> that's what I'm doing?
> 
> The story is I'm hoping to sand down the rust spots I
> have and prime them in preparation for painting, which
> should take place sometime next year. Does anyone have
> any advice on sanding techniques. rust blacking (the
> stuff that turns rust to metal, or at least inhibits
> the spread of further rust) or/and priming?
> 
> As always, thanks so much for the great advice...j
> 
> __________________________________________________
> Do You Yahoo!?
> Yahoo! - Official partner of 2002 FIFA World Cup
> http://fifaworldcup.yahoo.com
> 
> 
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
> 
> For list server instructions, go to
> http://www.chrysler300club.com/yahoolist/inst.htm
> 
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
> 
> 
> 
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
> 
> 
>