Re: [Chrysler300] 57C speedometer

[Mike Apfelbeck <moparmike@xxxx>]

Why not pull the speedo pinion gear out and count the teeth, then you can 
calculate the number of teeth you need on the new gear to get the right 
speed. You could also add a correction gearbox(not sure if that is the 
right term) in between the trans and the speedometer cable to get the 
change you need.
Mike

At 04:17 PM 11/22/2002 -0800, David Zakarian wrote:
> Just took the C out on the freeway. Seems the speedometer is 10 MPH 
> fast(reads 80 really only going 70). Somewhere I have seen a chart with 
> the different speedometer pinions that go with the different rear 
> ends(assuming that is the problem). Can't find it any more. Anyone out 
> there have this information? I'm running 235X75X14 tires. I don't think 
> this would be the problem.
>
> Zak
>
>
> [Non-text portions of this message have been removed]
>
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to 
> http://www.chrysler300club.com/yahoolist/inst.htm
>
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/