Fw: [Chrysler300] spinner wings - C-D filters and ram paint

["David Schwandt" <finsrus@xxxx>]

----- Original Message -----
From: "David Schwandt" <finsrus@xxxx>
To: "Thomas Miller" <tfm@xxxx>
Sent: Saturday, January 25, 2003 3:33 PM
Subject: Re: [Chrysler300] spinner wings - C-D filters and ram paint


> Hi Gang, Last fall I sent a complete one piece center cap and a couple of
> the "wings" to George Laurie, "Down Under". He was going to look into
> reproducing these. As of yet I have heard nothing back from him on these.
>
> On the subject of the ram paint. Cummins engine shops or any heavy duty
> truck or enginge repair shop are about the only places I can think of to
> look for this paint. If I can make it to the spring meet, I'll bring some
> along if anyone would want some. Truck stops are not going to have this
> stuff and if they did you can bet it would be twice the price!
>
> On the C-D-E air filters. The NAPA#2030 measures as folows. Height is
3.620"
> This is too high as the originals measure about 2-3/8". The OD and ID are
> correct and this is why they fit your housings as the 2030 is for the
> single 4 bbl New Yorkers and such.
>
> I also recieved from metalcrafters a confimation of my order for 1/4
panels.
>
> Dave Schwandt
>