carb cleaning

[Dan Dunkleberg <Signboy@xxxx>]

Hi Guys.....

I rebuilt my 61 NewYorker carb over the week-end and found that 
Berrymans Carb dip has been pulled off the shelf in the So. California 
area due to EPA regulations. I used regular carb cleaner in a spray can 
along with a small brass brush and alot of elbow grease! One question 
though..... I have been told that the sealer coating that Carter put on 
the carbs when made might come off if you use a strong cleaner like 
Berryman's or any other aluminum cleaner. I guess without the sealer 
coating the carb will absorb the gas through the body. So what about 
this Acid cleaning mentioned below??? I would hate to see the carb get 
destroyed.

300'ly

Dan

Raphael Brunet wrote:

> Thank you to all of you for your answers concerning cleaning the carbs
> of my 56 chrysler. No auto parts store here in France is selling
> specific carb cleaner in a bucket as some of you mentioned. So finally I
> ''ll try acid cleaning at a chome shop.
> Raphael ,Paris France
>
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
>
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/