Re: [Chrysler300] carb set up

["Warren R Anderson" <wranderson@xxxx>]

> two, inline four barrels....question...are the carbs to be set up so
they
> run progressively, or do they operate simultaneously?
>> Thanking you all in advance for your assistance
>> Ben Meisner


The float stuck in one carburetor on my C300. Until fuel started feeding
through both carburetors I had 4 dead cylinders; two each side in the front.
A 'street' single carburetor manifold normally feeds odd/even cylinders side
to side but not the C300? Easy there Caddy guys, I know 4 bbl 425 Cadillac
manifolds aren't built this way but most single 2 or 4 bbl manifolds are. Is
the E set up front 4, rear 4 or odd/even, side to side or as a plenum?

The '55 Chrysler manual says my C300 has a 'full race' camshaft. By
definition, what is a 'full race' camshaft as opposed to say a '3/4 race'
camshaft? Just something I should know, I guess.

Warren Anderson
Sedona,AZ