Re: [Chrysler300] rear end housing swap

[mwl1967@xxxx]

I have a 66 fury 83/4 housing in my 64 300. The fury housing is about an 
inch or a little less wider than the 300-- 


Elmer,
I assume you mean the center to center distance between the 
spring perches. Do you recall the overall (flange to flange) measurements ? 
I have several 64's and would like to do this swap and have looked at B-body 
rears as well as later model C-body rears and cant find one that will leave 
the tires where they belong in the wheel wheels. ie: bigger tires will 
clear the wheel wells with the stock 1964 rear but would put the tires into 
the metal with the wider, later model C-body stuff.

Mike Laiserin