Hi Gary, I remember communicating with Nick Conrad about your Swiss 300C, and he did explain to me that it was indeed converted to discs while in Switzerland, early on. Did he mention Corvette parts were used? I forget.... If this current conversion is giving you problems, I suggest that you purchase and install one of the two currently available FRONT disc conversions. I strongly suggest that you leave the rear drum setup alone. Either of these conversions will fit under the front 14" stock rims. If you are very mechanically adept, you can save yourself some money and make your own using Dan Reitz's blueprints. Contact Don Reitz for more info at : Dan300F@xxxx or check out the article at : http://crossrams.com/disc/neanderthal.html As far as the two conversions, they are available from 1/ Stainless Steel Brake 11470 Main Rd Clarence, NY 14031 800-448-7722 www.ssbrakes.com I did install such a kit, and it was an easy job. I took pictures, which you can view at: http://www.crossrams.com/rinaldi/discbrake/main.html and you can also read an article about this at: http://www.moparmusclemagazine.com/howto/26038/ 2/ AAJ Brake Located in Portland, Oregon (503) 890-1469 http://www.aajbrakes.bravepages.com/ I have not seen or installed their product. Hope this helps, sincerely, John Hertog Sag Harbor NY ----- Original Message ----- From: "Gary Gettleman" <Gary@xxxx> To: <chrysler300@xxxxxxxxxxxxxxx> Sent: Tuesday, June 03, 2003 11:14 PM Subject: [Chrysler300] 300C brakes > my car was converted to disc brakes (front) very early in its life. Conversion was done by chrysler? dealer in Zurich, Switzerland. I would like to convert to a good old USA disc set-up ( four wheel). Any suggestions > Gary Gettleman > G&G Associates > (408) 985-0182 Direct > (408) 867-7811 Fax > > > [Non-text portions of this message have been removed] > > > > To send a message to this group, send an email to: > Chrysler300@xxxxxxxxxxxxxxx > > For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm > > To unsubscribe from this group, send an email to: > Chrysler300-unsubscribe@xxxxxxxxxxxxxxx > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > >