[no subject]

[Ben Meisner <meisnerinc@xxxx>]

Hi Club;
1959-E 
I need help . I had my steering box rebuilt .. When I put the wheel back on and rotate it one and three quarter turns either way I assume I'm at dead center . I have now had the wheel off about 8 times and every time I center it I go for a quick drive only to discover that it is out exactly 90 degrees . the black is on the right and the tan on the left . Not up and down as it should be . Is there some little trick to center I have tried lining up the wheels straight making sure the notch is on the top of the wheel and stem only to find the same problem . Is there 3-1/2 turns in a 59 wheel ? that's what I seem to end up with so I use 1 3/4 as center

THANKS 
Ben Meisner



[Non-text portions of this message have been removed]