Re: [Chrysler300] 300D --Neutral Safety Switch

[paul holmgren <paulholm@xxxx>]

mlw102@xxxx wrote:

> I want to thank everyone that responded to my panic call for
> information on the Neutral Safety Switch and a supplier. Fortunately I was able to
> order a Switch from NAPA and it will be here in the morning. I am now very well
> educated on the problem now and hope it never happens again. Once again,
> thanks for everybody's help.

> Jack Wiltse

JACK!!!!!

Paper CLIP!!!!

works real well if you unbend a paper clip and rebend it to fit into
the top side of the 2 wire terminals that goto/come off that switch.

I had one that only acted up every now and then. It was real easy
to keep that modified paperclip in the glove box and when the switch
was acting up, just pop the hood, plunk that clip into the terminals
give it just a little push to make sure it was touching the terminals
and then start the beast right up, remove the paper clip, store it away
and drive off after shutting the hood.


-- 
Paul Holmgren
Hoosier Corps #33, L-6
2 57 300-C's in Indy