Re: [Chrysler300] 1960 Mirror Question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 1960 Mirror Question



Gary, The right side should be a twin strut. The strut
base will show the oval mark of the hollow rod but the
hole is not there. The tough thing is that there is a
short pedestal that goes under the strut base on the
right side! Good luck with this one. Heck I've seen
the left mirror with and without the little pedestal 
and thy are different. Regards, Jerry
--- gary_r_23 <garyandkathie@xxxx> wrote:
> I want to add a passenger side fender mirror to my
> 1960 and I want to 
> be sure I buy the correct one. I have the triple
> strut remote 
> adjustable mirror on the driver side, but should the
> passenger side 
> mirror also be a triple or a twin strut mirror? On
> the remote 
> adjustable mirror, the center strut houses the
> adjuster cables, so 
> it kind of makes sense that the mirror without the
> remote would be a 
> just a twin strut. Does anyone know which is
> correct?
> 
> Thanks,
> Gary
> 
> 
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
> 
> For list server instructions, go to
> http://www.chrysler300club.com/yahoolist/inst.htm 
> 
> Yahoo! Groups Links
> 
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/Chrysler300/
> 
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
> 
> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/ 
> 
> 






Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.