Re: [Chrysler300] Turn Signal Switch
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Turn Signal Switch



Thanks Marshall! Interesting. The spring in a pen may just work. 300ly, Brandt H. Jimerson, 300G

Marshall R Larson <yelof@xxxxxxxx> wrote:I suspect that the switch has distorted, due to age, such that the
actuator is binding in it's bore.  I have found that the springs from
retractable ball point pens can be substituted for many light duty
cylindrical spring applications.  You will note that these springs are
not all the same.  Some pens have soft springs and others have strong
springs.  By comparing springs from several pens a suitable match may be
found.  I salvage the springs before discarding a dry pen.
I've not yet been into one of these switches so I don,t know if this is
the type of spring used in them.  Maybe helpful information anyway.

Minnesota Marshall
Red G,  27 & 28 Dodge Brothers


On Mon, 31 Jan 2005 16:55:08 -0800 (PST) Brandt Jimerson
<brandt300g@xxxxxxxxx> writes:
> 
> Hello everybody!!  Yep, sure enough, my G turn signal cancel switch 
> isn't working either. I took it apart, cleaned the contacts and 
> examined the 'microscopic' spring which may but NOT necessarily be 
> the culprit for cancelling failure.  Put it this way, the small 
> rubber(like) arm (when switch is out), when pushed in, STAYS in. Is 
> this normal!? It seems that spring should push arm back out (when 
> pushed in), and in the installed case, remain rigidly outward after 
> brushing by any of the 4 (and I don't know what the heck they're 
> called) 'obstacles'  responsible for arm to go far enough to make 
> contact. It would work for a while but then those 'obstacles' would 
> (I'm thinking),  push rubber arm in and bad spring can't make arm go 
> back out  to where it should be for proper activation (if you can 
> follow what I just said). PLEASE NOTE THAT THIS IS MY THEORY ONLY 
> and may not be what is necessarily happening!! Please by all means, 
> suggestions a plus!  Sincerely and 300ly, Brandt H. Jimerson, 
>  300G. 


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 



---------------------------------
Yahoo! Groups Links

   To visit your group on the web, go to:
http://groups.yahoo.com/group/Chrysler300/
  
   To unsubscribe from this group, send an email to:
Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
  
   Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 



__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

[Non-text portions of this message have been removed]



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Help save the life of a child.  Support St. Jude Children's Research Hospital's
'Thanks & Giving.'
http://us.click.yahoo.com/6iY7fA/5WnJAA/Y3ZIAA/8LmulB/TM
--------------------------------------------------------------------~-> 

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.