Re: [Chrysler300] Test run

["Warren Anderson" <wranderson@xxxxxxxxxxxxx>]

>
> John .Some time ago I asked how You plugged the tyranny at the output
shaft,You replied you were talking about a cast iron torkeflight with a
break drum on the back.Now you are talking about a (L) .Unless it has a
stick you still have to plug  the output shaft? Split the U-joint and run
the stub ? Clamp a broom stick like a lathe center to keep the stub in
place?Will it tend to blow back dumping all that red stuff on the deck? Not
trying to be quite just looking for answers .Jim McMullan 300 F
>
>
> James McMullan


A handy thing to have is one of the plastic plugs made specifically to keep
fluid from running out the tailshaft housing when there is no output flange
or yoke installed. Suggest verify the fit, but NAPA has a transmission stop
off tool  #2547. I mention NAPA solely because of the universal availability
of NAPA stores as other stores and wagon tool dealers will also have such a
tool.

Warren Anderson
Sedona,AZ



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Give the gift of life to a sick child. 
Support St. Jude Children's Research Hospital's 'Thanks & Giving.'
http://us.click.yahoo.com/5iY7fA/6WnJAA/Y3ZIAA/8LmulB/TM
--------------------------------------------------------------------~-> 

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/