Re: [Chrysler300] Old Carbs
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Old Carbs



Ray,

A couple ago, when rebuilding and souping the 383 in my 66/300, I swapped my
original Carter 4131 for an Edelbrock 1411. What I discovered in the process
is that the bolt pattern on the 1411 was larger and would not fit the
original intake manifold. It did fit a manifold that I got from a '70
Roadrunner, however,--which I'm now using in my '66. Also, I had to use
Edelbrock's throttle linkage adapter, which works fine.

I don't know about a 1404, but it would be worth checking the fit before you
buy. Your '64K is a totally different animal than my '66, and a 1404 may
bolt right up.

Jack
--------------------------------------------------------------

> From: "Ray Lepore" <moparlepore@xxxxxxxxxxx>
> Date: Wed, 18 May 2005 13:22:50 -0000
> To: Chrysler300@xxxxxxxxxxxxxxx
> Subject: [Chrysler300] Old Carbs
> 
> Hi, I'm sick and tired of working on the 41 year
> old carbs on my 1964 300K crossram, and was wondering
> if anyone has swapped new Edelbrock (AFB) carbs for the
> stock ones. It looks like the EDL 1404 500 cfm, manual
> choke would be the carbs.
> What I would like to know from anyone that has done the
> swap is did they have any problems adapting the linkage
> to the new carbs?
> I understand that many of the group members belive that
> the cars have to stay original, but because of these carbs
> I'm going to miss the spring meet this year. To have the
> stock carbs rebuild by a Pro carb shop would cost almost
> $600.00 the Edelbrock's are a little over $400.00 for brand
> new.
> Thank you,
>   Ray
> 
>



------------------------ Yahoo! Groups Sponsor --------------------~--> 
What would our lives be like without music, dance, and theater?
Donate or volunteer in the arts today at Network for Good!
http://us.click.yahoo.com/2xaSZB/SOnJAA/Y3ZIAA/8LmulB/TM
--------------------------------------------------------------------~-> 

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.