[Chrysler300] 15" wheels

["Tony Bevacqua" <tonysru2@xxxxxxxxxxx>]

Doug,

In the 300G Service Bulletin, it shows the tire size of 8.00 X 15 as
standard equipment.  Then, it says; "For Service Procedures, refer to Group
22 in the 1961 Chrysler and Imperial Service Manual Supplement."  So, I go
to the 1961 Supplement, group 22, and see only the Imperial (RY-1) with 15"
specs.  Wheel size of 15 x 6L, stud size of  9/16" -18, tire size of 8.20 x
15 (G is 8.00 x 15), 5 wheel nuts.  That's all I can get from my manuals.  I
hope this helps you.

Tony

 

-----Original Message-----



Tony, could you look up the G wheel designation in your 1961 service and
repair manual to see if it is the same as for my H (15x6 K). I took the
spare from my H to Stockton Wheel yesterday and Frank thought that it was a
15x5.5 wheel. I will pull a wheel tonight and check to make sure that my
spare tire is not mounted on a non H wheel and then get back in touch with
Frank. Frank also wanted to know if our drums have the stud on them that
would require a special hole in the new wheel centers.  Doug Warrener



[Non-text portions of this message have been removed]



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page
http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/8LmulB/TM
--------------------------------------------------------------------~-> 

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/