[Chrysler300] 1962 AC Switch

["Matt Allyn" <mallyn@xxxxxxxxxxxxxxx>]

So,

I have a problem.
Here's what was happening:
- Press in the Max Air button and the AC compressor comes on and all 3 fan
speeds work. 
- Press in the Fresh Air button and the AC compressor comes on and all 3 fan
speeds work. 
- Press the Defrost button and none of the fan speeds work, though the hot
air will flow driving down the road.
- Press the Heat button and none of the fan speeds work, though the hot air
will flow driving down the road.

Then the AC compressor stayed on no matter what button was pressed in. So, I
then had to unplug the AC compressor under the hood. The next day I plugged
the AC compressor back in under the hood and now it will not turn on with
the buttons. 

Today I picked up a brand new switch at a Dodge dealership, which I will
install tomorrow. Once installed should ALL problems be resolved?  OR do I
need to look further into the push/pull fan switch too?

Thanks!

Matt Allyn
Exec. in Charge of Prod.
Granada America
323-785-2129 office
323-785-2151 fax
562-533-2551 cell


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links



 







To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/