Hi John, Chrysler should have the "o" Rings for your steering valve body. John L. Chesnutt, Portland, Oregon -----Original Message----- From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of john_nowosacki@xxxxxxxxxxx Sent: Friday, June 29, 2007 5:27 PM To: Chrysler300@xxxxxxxxxxxxxxx Subject: [Chrysler300] Hurst help Hi folks, Anyone know of a source for left/driver's side TNT exhaust manifold # 3418351? The one on my Hurst is cracked near the end of the fins that are under the carb preheat cover. Any leads appreciated. Also, the control valve body seems to be weeping a little fluid from where it is connected to the steering valve body on top of the steering box. I suspect the two little o-rings that are inbetween the 2 pieces, but can't identify them as parts I can buy anywhere. Any suggestions? John [Non-text portions of this message have been removed] To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/ Yahoo! Groups Links To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: mailto:Chrysler300-digest@xxxxxxxxxxxxxxx mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/