Re: [Chrysler300] in tank sending unit not worki g update

["Warren Anderson" <wranderson@xxxxxxxxxxxxx>]

  Second thought here. Have at least two plastic non metal floats available. These are mounted to swing arm via a hole through the center. Brass floats are round and have no hole. These would work where original cork float slipped over end of wire. Some may have mounted differently clipped on like brass floats  but for design I remember floats I have off used up electric in tank fuel pump assemblies might just work and with a mailing address some could be headed your way next week. This style float I have never seen as a separate part. I will now salvage these floats and in the future. Thanks for the idea. I may even need one. 

[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/