Hi Doug; Here's how it works: There is a solenoid motor which "winds" the clock. It clicks, which is the solenoid pulling the arm up, and then the spring makes it "tick-tock" down to the bottom to be rewound. With it open, you should be able to follow this. Two things mainly keep it from working; The contacts at the bottom which apply the volts are corroded, and/or the slide is sticky and needs light lube on it. Installed, what you'll hear is the click when it reloads and probably not the winding down. This takes about 2 minutes to cycle. Ray "It's the fellowship that makes it a special event." Nifty neat stuff gonna be ahappening at the Spring Meet...Y'all gotta come and play with us! Ray On Jan 31, 2008, at 3:12 PM, Doug Mayer wrote: I have removed the clock from my 300L. Seemed a good thing to do in the Maine mid-winter. After all, spring is coming, and we will be able to swim in the Eagle River in Wisconsin then, according to our host. Back to the clock. It doesn't work. But when connected to the battery the little points that throw the fly wheel (or whatever they do) work once. So the little motor knows what to do with DC volts, I think. All the parts and pieces seem to be present. So what do I do to clean and oil the thing. What are the steps and what can I expect as I move through them. I know that this topic was on the server some time ago, so I am hopeful that the clock fixers can respond. Thanks. 300L ly, Doug Doug Mayer mobydoug@xxxxxxxxxxxxxxxx [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: mailto:Chrysler300-digest@xxxxxxxxxxxxxxx mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/