RE: [Chrysler300] C mufflers, rag style

["Rich Barber" <c300@xxxxxxx>]

I think buying exhaust piping is like buying false teeth.  You need to go in
and have them fit.  Mail order doesn't cut it.  

Some chassis are very simple and almost anything will go in without
rattling.  Most others are complex enough to require heating and beating.
My muffler guy says this is becoming a lost art as today's exhaust systems
last so much longer.

Anyone have a source for original or reproduction hangers and clamps for the
1955 C-300?

C-300'ly,
Rich Barber

-----Original Message-----
From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
Behalf Of Raspberry Manor Bed & Breakfast
Sent: Sunday, April 20, 2008 4:26 PM
To: rob kern; JettLarry@xxxxxxx; Ray Jones; Pat Grant
Cc: Chrysler 300 Broadcast
Subject: Re: [Chrysler300] C mufflers, rag style

Hi Gang,  I also had a very bad experience with Waldrons-- nothing fit or
could even be used.  Ate it all  Don Rook
  ----- Original Message ----- 
  From: Pat Grant 
  To: rob kern ; JettLarry@xxxxxxx ; Ray Jones 
  Cc: Chrysler 300 Broadcast 
  Sent: Friday, April 18, 2008 8:01 PM
  Subject: Re: [Chrysler300] C mufflers, rag style


  they are in southern michigan and my experience with them is that they
suck. i bought a set of duals for a 361 in a 58 dodge and had to throw most
of the set away. werent even close. pat
  ----- Original Message ----- 
  From: rob kern 
  To: JettLarry@xxxxxxx ; Ray Jones 
  Cc: Chrysler 300 Broadcast 
  Sent: Friday, April 18, 2008 8:12 PM
  Subject: Re: [Chrysler300] C mufflers, rag style

  Waldron's Exhaust in Minnesota. They are top quality service people with
the correct mufflers for our Cs. www.waldronexhaust.com 300'ly, ROB KERN
  ----- Original Message ----- 
  From: Ray Jones 
  To: JettLarry@xxxxxxx 
  Cc: Chrysler 300 Broadcast 
  Sent: Friday, April 18, 2008 6:48 PM
  Subject: Re: [Chrysler300] C mufflers, rag style

  Hi Larry;
  Since you are of the Street Rod persuasion, just put on a couple of 
  California Turbos. Should give you a nice purr and not be tooooo loud. 
  Replace the rear resinators with straight pipes and if the sound is too 
  Rumbly, add in a couple small resinators. These are available as 
  generic, by pipe diameter.
  Ray in Mena

  On Apr 18, 2008, at 6:28 PM, JettLarry@xxxxxxx wrote:

  All four of the sound-stoppers on my C rag need replacing. Where should 
  I
  send the few bucks this retired gent ekes out washing windows at
  intersections? The local muffler shops go nuts when I drive in but say 
  I have to find my
  own muffs and it has been 12 years since I bought the last ones. The 
  answer
  is?

  Larry Jett PO Box 465 Newark, CA 94560 510 794 7911

  




------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/