[Chrysler300] Replacing Park Lock Spring - '63 300

["Mark Lindahl" <mplindahl@xxxxxxxxxxxxx>]

Hi,

The Service Manual indicates that the push button shifter assy should back out of the dash after the mounting nuts are removed.
I tried to move the shifter assy back, but it seemed like there were some metal braces directly behind the assy that would not allow it to move back far enough to tilt down and out of the back of the dash.  The manual does not suggest that any of the two cables should be removed prior to taking the assy out.  Is there a trick that I may be missing to get this out?  Do I need to remove the speedometer?

Thanks,
Mark Lindahl
'63 300 Conv.

[Non-text portions of this message have been removed]


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/