[Chrysler300] electrical hints please

[<john_nowosacki@xxxxxxxxxxx>]

Hi Group,

My 57C has developed a strange new symptom regarding turn signal operation.

My left (driver's side) functions perfectly, but the passenger side refuses to blink.  Both the front and rear lights light up, but do not blink on and off, they just stay on when I use the signal.  Also, the indicator on the dash for the right turn arrow does not light up, but I checked the bulb and it is fine.

I used a new Greg Legatt wiring harness during my restoration, and all was well when I put it together 2 years ago, so I don't believe it is a harness issue.  I can't remember where the turn signal relay is physically located, or if it is even a separate part I can easily reach to replace.  I'm puzzled by the fact that the dash indicator doesn't light even though both the front and rear turn signal bulbs do.  I was pretty sure the front light and the dash indicator were physically connected to the same terminal on the turn signal relay.

 

Any hints appreciated.

 

John



[Non-text portions of this message have been removed]


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/