[Chrysler300] electric window motor removal ?

["Fern" <crc@xxxxxxxxxxxxxxx>]

Hi Jeff:

      Before removing the window, make sure that the switch is in fact working. So by-pass the switch assembly by feeding 12 volts power directly to the motor by simply unplugging the plug near the motor and feeding the power directly in there. You may have to reverse your feed wires to get the motor to go in the right direction. I doubt very much that the motor is burnt. You could also check with a volt meter to make sure that +12 volts is in fact reaching the motor feed. Fern



[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/