Jeff. Assuming the P/window stuff is the same for a L and G (I have a G), I think all you need to do to take the motor out safely is take off the TWO NUTS holding the motor itself to the gear/transmission assembly, and NOT the three bolts that hold the gear/transmission assembly to the regulator. Jean-Yves (G, J and K.) ----- Original Message ----- From: lil_jake5 To: Chrysler300@xxxxxxxxxxxxxxx Sent: Sunday, March 22, 2009 1:39 AM Subject: [Chrysler300] electric window motor removal ? Hi all, Was on a run last night and my electric motor in the window winder has burnt out and i have taken the door lining off and all handles etc, but my question is - is there an easy way of removing the motor and is it just 2 bolts and it comes out. Its for a 1965 300L drivers side door window with the 4 window controler. The controller works the other 3 windows but not the drivers side(i think it got stuck in the down motion for a few hours and just burnt the motor or wiring out. any help apreciated by those who have done this exact job previouosly. I just want to be sure before i tackle it and stuff something up. cheers Jeff Australia [Non-text portions of this message have been removed] ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: mailto:Chrysler300-digest@xxxxxxxxxxxxxxx mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/