Re: [Chrysler300] Valve covers
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Valve covers



Hi all;  The '63 300J used 4 bolt valve covers.  Even though they had the "ears" on each end of the valve covers, they were not drilled. And the heads did not have the "extensions" for the other two studs on the lower front and rear.   Strange but true!??
  George 




  ----- Original Message ----- 
  From: lettercars@xxxxxxx 
  To: mavche@xxxxxxxxxxxx ; Chrysler300@xxxxxxxxxxxxxxx 
  Sent: Wednesday, April 15, 2009 12:11 PM
  Subject: Re: [Chrysler300] Valve covers





  Hi Al and All:
  The 300E valve cover gaskets have only four holes. That is the same thru 
  1962. I believe the change to six holes came during the 1963 model year, 
  but will defer to our 300J expert, George Riehl on that. The 300K and up 
  all have the six hole gaskets---which, in my experience are still capable of 
  a leak or two!!
  300ly, Gil C.


  In a message dated 4/15/2009 12:06:06 P.M. Eastern Daylight Time, 
  mavche@xxxxxxxxxxxx writes:

  Could someone remind me if the valve cover gaskets for the E take a 4-hole 
  set or not. In addition, what years required the 4-hole valve cover 
  gaskets? I'm too lazy right now to look up the parts number. Thanks, Al 
  Vannice

  [Non-text portions of this message have been removed]

  ------------------------------------

  To send a message to this group, send an email to:
  Chrysler300@xxxxxxxxxxxxxxx

  For list server instructions, go to 
  http://www.chrysler300club.com/yahoolist/inst.htm

  For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups 
  Links

  **************Great deals on Dell’s most popular laptops – Starting at 
  $479 
  (http://pr.atwola.com/promoclk/100126575x1220631252x1201390195/aol?redir=http:%2F%2Fad.doubleclick.net%2Fclk%3B213968550%3B35701427%3Bh)

  [Non-text portions of this message have been removed]



  

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.