We bought Cokers for my 1957 300C in April 2005 and had them delivered to the Portland Swap Meet for pickup.. Have driven them only 33 miles. We had to put too much weight on them to get a good balance. We even rotated the tire on the rim 180 degrees. This corrected the balancing some but one tire has still too much weight. We are getting our 300C ready to drive it to the Chrysler 300 meet at Tacoma Washington, August 26 -30. Just replaced the brakes on the front including new wheel cylinders, new master cylinder and rebuilt Power Brake Booster and the short rubber brake line below the master cylinder. It was completely blocked due to age. We are celebrating our 50th wedding anniversary and had driven it 50 years ago from Seattle to Mexico. It still runs great. Over the years, we rebuilt the engine twice and put 10 1/2 pistons in the 392. Those who come to the Tacoma meet will see an all original Copper Brown 300C except for the motor modifications. It still looks good after 51 years. John & Arlys Chesnutt -----Original Message----- From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of George McKovich Sent: Monday, August 03, 2009 9:19 AM To: guyztoys@xxxxxxx Cc: Chrysler300@xxxxxxxxxxxxxxx Subject: Re: [Chrysler300] 300E tires I have had 6 sets of Coker Classic radials and 3 sets have had tread separations and one set took 20 ounces on one of the tires to balance. I would buy ANYTHING but Coker! George Sent from my iPhone On Aug 3, 2009, at 10:10 AM, guyztoys@xxxxxxx wrote: > I am about ready to purchase new tires for my 300E. I am > contemplating the Coker Classic Nostalgic Radial and the American > Classic Radial --- both being P235/75Rx14 with the 2.5 inch www. > Anyone care to comment about these tires ?? Any other brand or size > recommendations ?? > I see the major tire vendors ( Lucas, Universal and Coker) all carry > the American Classic. A couple of days ago, I was told by a person I > spoke with at Diamond Back Classic Radials that Coker had bought out > American Classic. > Any comments ?? > > Thanks to all, > Guy Morice > only 1 E left > Oswego, IL > > [Non-text portions of this message have been removed] > > [Non-text portions of this message have been removed] ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: mailto:Chrysler300-digest@xxxxxxxxxxxxxxx mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/