Re: [Chrysler300] windshield wiper refill blades

["Dave Schwandt" <finsruskw@xxxxxxxxxxxxxxx>]

That site dosen't show anything for our cars that I could locate.
Looks like all, new stuff, Complete arms etc.

Maybe ANCO has a listing we could get to on the net.

Dave Schwandt


----- Original Message ----- 
From: <c300c@xxxxxxx>
To: <Kraus300@xxxxxxxxxxx>; <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Sunday, October 11, 2009 11:39 AM
Subject: Re: [Chrysler300] windshield wiper refill blades


> For Anco wiper blades, try this:
>
> _http://www.imperialinc.com/grp462.shtml_
> (http://www.imperialinc.com/grp462.shtml)
>
> 300'ly, Gary Hagy
>
>
> In a message dated 10/11/2009 11:06:20 A.M. Eastern Daylight Time,
> Kraus300@xxxxxxxxxxx writes:
>
>
>
> I replaced my 300C and 57 Dodge blade refills (blade only) last  year.
> Don't remember any problems fitting them. The catalog shows the same 
> blade
> refill for 300F.
>
>
>
> I used Anco U16. The U is  universal and wider than the now standard 6 mm
> blade refills.
>
>
>
> The book says these refills will only fit the factory wiper  arms.
>
>
>
> Jim Krausmann
>
>
> ----- Original Message  ----- 
> From: "Dave Schwandt" <finsruskw@xxxxxxxxxxxxxxx>
> To:  "Michael Reed" <mrreed@xxxxxxxxx>, Chrysler300@xxxxxxxxxxxxxxx
> Sent:  Sunday, October 11, 2009 10:34:21 AM GMT -05:00 US/Canada Eastern
> Subject:  Re: [Chrysler300] windshield wiper refill blades
>
>
>
>
>
>
> I ran into the same problem on the way to Branson. Got a  pair of refills
> from O'Reillys and tried to make them work but had no  luck. Even after I
> had
> crimped the arms to accept the narrower blades they  still flopped around
> in
> the arm enough that the arm would nearly scratch  the windshield so I took
> them back.
>
> Not only is the slotted metal  blade holder, for lack of a better term, 
> too
> narrow but the blade did not  seem to be as "tall" as the originals. O got
> to
> wondering later that maybe  the original blade holder might be substituted
> for the newer narrow one  but by this time the rain had pretty much 
> cleared
> out and wipers were not  an isue.
>
> Dave Schwandt
>
> ----- Original Message ----- 
> From:  "Michael Reed" < mrreed@xxxxxxxxx >
> To: <  Chrysler300@xxxxxxxxxxxxxxx >
> Sent: Sunday, October 11, 2009 5:26 AM
> Subject: Re: [Chrysler300] windshield wiper refill blades
>
>>I  searched for years, but all the refills I found were to narrow for the
>>arm. I finally just modified the arm to securely accept the narrower
>>refills.
>>
>> Mike
>>
>> Nothing screams  liberal quite like making fun of someone's disability.
>>
>> -----  Original Message ----- 
>> From: M. Litsky
>> To:  Chrysler300@xxxxxxxxxxxxxxx
>> Sent: Saturday, October 10, 2009 7:25 PM
>> Subject: [Chrysler300] windshield wiper refill blades
>>
>>
>> Hi Group
>>
>> I have a 300k and I need new  wiper blade refills. They are 16 inch and I
>> can not find them  locally. Does anyone know where to purchase them. The
>> refill I did  find did not stay in the arm. It was not wide enough to
> stay
>> in the  slide. Thanks for your help Mike 300k
>>
>> [Non-text portions of  this message have been removed]
>>
>>
>>
>>
>>
>> [Non-text portions of this message have been removed]
>>
>>
>>
>> ------------------------------------ 
>>
>> To send a message to this group, send an email to:
>>  Chrysler300@xxxxxxxxxxxxxxx
>>
>> For list server instructions, go  to
>> http://www.chrysler300club.com/yahoolist/inst.htm
>>
>> For archives go to http://www.forwardlook.net/300-archive/Yahoo !  Groups
>> Links
>>
>>
>>
>>
>
>
>
>
> [Non-text portions of this message have been  removed]
>
>
>
> ------------------------------------
>
> To send a  message to this group, send an email  to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to
> http://www.chrysler300club.com/yahoolist/inst.htm
>
> For archives go to  http://www.forwardlook.net/300-archive/Yahoo! Groups
> Links
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to 
> http://www.chrysler300club.com/yahoolist/inst.htm
>
> For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups 
> Links
>
>
>
> 



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/