For Anco wiper blades, try this: _http://www.imperialinc.com/grp462.shtml_ (http://www.imperialinc.com/grp462.shtml) 300'ly, Gary Hagy In a message dated 10/11/2009 11:06:20 A.M. Eastern Daylight Time, Kraus300@xxxxxxxxxxx writes: I replaced my 300C and 57 Dodge blade refills (blade only) last year. Don't remember any problems fitting them. The catalog shows the same blade refill for 300F. I used Anco U16. The U is universal and wider than the now standard 6 mm blade refills. The book says these refills will only fit the factory wiper arms. Jim Krausmann ----- Original Message ----- From: "Dave Schwandt" <finsruskw@xxxxxxxxxxxxxxx> To: "Michael Reed" <mrreed@xxxxxxxxx>, Chrysler300@xxxxxxxxxxxxxxx Sent: Sunday, October 11, 2009 10:34:21 AM GMT -05:00 US/Canada Eastern Subject: Re: [Chrysler300] windshield wiper refill blades I ran into the same problem on the way to Branson. Got a pair of refills from O'Reillys and tried to make them work but had no luck. Even after I had crimped the arms to accept the narrower blades they still flopped around in the arm enough that the arm would nearly scratch the windshield so I took them back. Not only is the slotted metal blade holder, for lack of a better term, too narrow but the blade did not seem to be as "tall" as the originals. O got to wondering later that maybe the original blade holder might be substituted for the newer narrow one but by this time the rain had pretty much cleared out and wipers were not an isue. Dave Schwandt ----- Original Message ----- From: "Michael Reed" < mrreed@xxxxxxxxx > To: < Chrysler300@xxxxxxxxxxxxxxx > Sent: Sunday, October 11, 2009 5:26 AM Subject: Re: [Chrysler300] windshield wiper refill blades >I searched for years, but all the refills I found were to narrow for the >arm. I finally just modified the arm to securely accept the narrower >refills. > > Mike > > Nothing screams liberal quite like making fun of someone's disability. > > ----- Original Message ----- > From: M. Litsky > To: Chrysler300@xxxxxxxxxxxxxxx > Sent: Saturday, October 10, 2009 7:25 PM > Subject: [Chrysler300] windshield wiper refill blades > > > Hi Group > > I have a 300k and I need new wiper blade refills. They are 16 inch and I > can not find them locally. Does anyone know where to purchase them. The > refill I did find did not stay in the arm. It was not wide enough to stay > in the slide. Thanks for your help Mike 300k > > [Non-text portions of this message have been removed] > > > > > > [Non-text portions of this message have been removed] > > > > ------------------------------------ > > To send a message to this group, send an email to: > Chrysler300@xxxxxxxxxxxxxxx > > For list server instructions, go to > http://www.chrysler300club.com/yahoolist/inst.htm > > For archives go to http://www.forwardlook.net/300-archive/Yahoo ! Groups > Links > > > > [Non-text portions of this message have been removed] ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links [Non-text portions of this message have been removed] ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: mailto:Chrysler300-digest@xxxxxxxxxxxxxxx mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/