[Chrysler300] 300L stub frame attachment point shims.

["Carlton Schroeder" <schroe99@xxxxxxxxxxxx>]

This past weekend I helped my brother remove the stub frame from the body of his L.  It was very easy to disassemble.

On the front mating area of the stub frame and body on the passenger side there were 3 (approx 3" x 6" x 1/16" shims) and on the driver side there were 2 of the same shims.    

Don will reassemble the same way but we wondered if this was a factory procedure to make a final correcting adjustment during assembly.  What would be measured to determine if / what shims would be necessary? 

Thanks,

Carlton Schroeder
Eagle River, WI 

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/