Re: [Chrysler300] F or G trunkpan

[<smopar@xxxxxxxxxxxxxx>]

Ron, I could inquire with them whether they would have interest in reproducing this part as well.  Does anyone have a good lower weatherstrip channel that they would be willing to donate to making the die for a reproduction piece?

Steve

---- Ron Waters <ronbo97@xxxxxxxxxxx> wrote: 
> Steve -
> 
> Since R-Car Fabrications already manufactures good quality 60-64 trunk pans, 
> perhaps your fabrication company can instead fabricate the lower 
> weatherstrip channel for 60-1 Chryslers (and Desotos), which is an area that 
> seems to rust out pretty easily and is not easy to repair.
> 
> Ron
> 
> 
>  >I am currently working with a company that sells Chrysler and other 
> vehicle makes' trunk pans (and other rust repair sheet metal for the lower 
> body areas) on ebay to have them reproduce the trunk pans for the 1969 - 
> 1973 C bodies.  They all interchange fairly well, with only some minor 
> modifications required between the various years from what I can tell.
> The ball is now in my court to furnish him with a very good trunk pan which 
> he can then copy and refabricate.  I have one removed from one of my parts 
> cars now, but need some more free time to drill out all the many spot welds 
> to release it from the frame rails that I also had to cut to get it out.
> Even when I get some free time, it will take them some time to reproduce 
> them, but at least I am making some progress now.
> Regards
> Steve Albu
> 
> 
> 
> ---- 2HsandaHeritage@xxxxxxxxxxx wrote:
> >
> >
> > Bob and all,
> >
> > I have a friend who is looking for a source for trunk floors for a 1969 
> > Newport conv. - any suggestions or sources?
> >
> > Thanks,
> >
> > Doug Warrener
> > ----- Original Message ----- 
> > From: "Bob Jasinski" <rpjasin@xxxxxxxxxxx>
> > To: chrysler300@xxxxxxxxxxxxxxx, "charles marshall" <dualghia@xxxxxxxxxxx>
> > Sent: Monday, March 8, 2010 9:18:33 AM GMT -08:00 US/Canada Pacific
> > Subject: RE: [Chrysler300] F or G trunkpan needed,parting a 63 coupe
> >
> >
> >
> >
> >
> >
> > Regarding trunk floors, I copied this thread from 2006 that will provide
> > insight as to what fits. It's from Don Verity and John Hertog. Also, I
> > know someone was/is reproducing the floors, I just have to find it. They
> > were about $175 delivered.
> >
> > Bob J
> >
> > Hi All,
> >
> > The trunk floors from 60-64 are exactly the same as removed at the spot
> > welds. The location of the spare tire hold down is the only difference. 
> > The
> > filler neck area is actually part of the rear body panel.
> >
> > 300ly,
> >
> > Don
> >
> > ----- Original Message ----- 
> >
> > From: John J. Hertog < crossram@xxxxxxxxxxxxx >
> >
> > To: Jonnie < Jslayton@xxxxxxxxxx >; < Chrysler300@xxxxxxxxxxxxxxx >
> >
> > Sent: Saturday, January 07, 2006 6:37 AM
> >
> > Subject: Re: [Chrysler300] trunk floors
> >
> > > Hi Johnnie,
> >
> > >
> >
> > > My turn - if you find two of them, let me know, I also need one ! The
> >
> > > answer to your question is that 60 thru 64 Chrysler are the same as
> >
> > > far as the flat part of the floor. Find a '64 (a lot easier to find)
> >
> > > and you are all set. There is only one very minor difference and it's
> >
> > > by the gas
> >
> > filler
> >
> > > area if memory serves me right.
> >
> > >
> >
> > > John
> >
> > > ----- Original Message ----- 
> >
> > > From: "Jonnie" < Jslayton@xxxxxxxxxx >
> >
> > > To: < Chrysler300@xxxxxxxxxxxxxxx >
> >
> > > Sent: Friday, January 06, 2006 10:43 PM
> >
> > > Subject: [Chrysler300] trunk floors
> >
> > >
> >
> > >
> >
> > > > Can someone tell me if the 60-61 trunk floors are the same ? Does
> >
> > > > anyone have a used 61------decent shape------they would like to sell
> >
> > > > ?------Johnnie Slayton
> >
> > _____
> >
> > From: Chrysler300@xxxxxxxxxxxxxxx [mailto: Chrysler300@xxxxxxxxxxxxxxx ] 
> > On
> > Behalf Of Jerry Lindsay
> > Sent: Monday, March 08, 2010 4:12 AM
> > To: chrysler300@xxxxxxxxxxxxxxx ; charles marshall
> > Subject: Re: [Chrysler300] F or G trunkpan needed,parting a 63 coupe
> >
> > I know there is a source out there, New Jersey, Georgia, somewhere. I know
> > Source One makes floor pans that fit, and I believe the trunk guy may have
> > even advertized in our club leter??
> >
> > Jerry Lindsay
> > ----- Original Message ----- 
> > From: "charles marshall" <dualghia@hotmail. 
> > <mailto:dualghia%40hotmail.com>
> > com>
> > To: <chrysler300@ <mailto:chrysler300%40yahoogroups.com> yahoogroups.com>
> > Sent: Sunday, March 07, 2010 9:51 AM
> > Subject: [Chrysler300] F or G trunkpan needed,parting a 63 coupe
> >
> > anyone have a solid trunkpan from a 1960 or 61? is a 62 the same?
> >
> > also could use the panel that holds the weatherstrip between the bumper 
> > and
> > trunklid
> >
> > helping a friend dispose of 63 non-letter coupe parts from a rust-free 
> > calif
> >
> > car if anyone needs any sheetmetal,chrome,int parts,383 core,etc
> >
> > __________________________________________________________
> > Hotmail: Trusted email with Microsoft's powerful SPAM protection.
> > http://clk.atdmt. < http://clk.atdmt.com/GBL/go/201469226/direct/01/ >
> > com/GBL/go/201469226/direct/01/
> >
> > [Non-text portions of this message have been removed]
> >
> > ------------------------------------ 
> >
> > To send a message to this group, send an email to:
> > Chrysler300@ <mailto:Chrysler300%40yahoogroups.com> yahoogroups.com
> >
> > For list server instructions, go to
> > http://www.chrysler < http://www.chrysler300club.com/yahoolist/inst.htm >
> > 300club.com/yahoolist/inst.htm
> >
> > For archives go to http://www.forwardl
> > < http://www.forwardlook.net/300-archive/Yahoo > 
> > ook.net/300-archive/Yahoo!
> > Groups
> > Links
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> 
> 
> 
> ------------------------------------
> 
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
> 
> For list server instructions, go to 
> http://www.chrysler300club.com/yahoolist/inst.htm
> 
> For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups 
> Links
> 
> 
> 



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx


To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx


For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/