Re: [Chrysler300] Vibration Damper 300G

["Dave Schwandt" <finsruskw@xxxxxxxxxxxxxxx>]

Steering wheel puller set should have the correct bolts and yoke to do the 
job, Mine does
It's a Blue Point (poor mans Snap-On)

Dave Schwandt

----- Original Message ----- 
From: "Bob Jasinski" <rpjasin@xxxxxxxxxxx>
To: "'Chrysler 300 group'" <chrysler300@xxxxxxxxxxxxxxx>
Sent: Wednesday, May 12, 2010 11:16 AM
Subject: RE: [Chrysler300] Vibration Damper 300G


> Since we’re on the subject of vibration dampers, what is the 
> recommendation of the specific tool used to remove the damper?  I know it 
> is a puller, but I’d like to know more specifically what others have used, 
> and where did you get it?  I have several pullers and none seem to fit the 
> application.
>
>
>
> Bob J
>
>
>
> From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On 
> Behalf Of Thomas Cox
> Sent: Wednesday, May 12, 2010 4:20 AM
> To: MATTHEW OSTROWSKI; Chrysler 300 group
> Subject: [Chrysler300] Vibration Damper 300G
>
>
>
>
>
> Matt,
>
> The best advice I can give you is: Do not drive your car!! My harmonic 
> balancer just failed and the imbalance created by that failure resulted in 
> spun rod and main bearings, so I am having to rebuild a recently rebuilt 
> engine.
>
> There are folks that rebuild the balancers. Not sure at this time, but the 
> club will adivse you.
>
> Tom Cox
>
>
>
> ________________________________
> From: MATTHEW OSTROWSKI <m.ostrowski@xxxxxxxx 
> <mailto:m.ostrowski%40snet.net> >
> To: Chrysler 300 group <chrysler300@xxxxxxxxxxxxxxx 
> <mailto:chrysler300%40yahoogroups.com> >
> Sent: Wed, May 12, 2010 7:05:02 AM
> Subject: [Chrysler300] Vibration Damper 300G
>
>
> Good Morning Fellow Members,
>
> Last week I finally pulled the wraps off my "G" and drove it over to my 
> home getting it ready for the season. When starting the car up I'm hearing 
> a "clunking sound". Upon inspection (with my mechanic buddy) we determined 
> that the vibration damper is loose/has play in it. What do I need to do to 
> repair this? Where can I find a replacement part? Do any of you have one 
> and would be willing to sell it?
> Let me know, as always I appreciate your assistance on this matter.
>
> Warm Regards,
> Matt Ostrowski
> Norwich, Connecticut
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
>
> To unsubscribe from this group, send an email to:
>    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
>
>
> For list server instructions, go to 
> http://www.chrysler300club.com/yahoolist/inst.htm
>
> For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups 
> Links
>
>
>
> 



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx


To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx


For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/