[Chrysler300] clutch replacement

[Dave Dumais <daveskstick@xxxxxxxxx>]

Hi Guys,
I think it's time to R and R the K clutch.    The manual lists Borg and Beck 1579, 3 levers and 2490 total spring pressure lbs @1 1/2".     Is this assembly still available?  The parts guy at the Local Chrysler garage here seems to know a bit about do's and don'ts of clutches.

I found the snap ring, bearings and seals for the z-bar, right at the dealer!

He recommends OEM parts if they can be found, and not the Ram, Centerforce applications due to o built in slip action.      Anyone have asource for OEM?  thanks  Dave D.



      

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx


To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx


For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/