Re: [Chrysler300] 1958 300D Armrest Support

["Jerry Lindsay" <jerrylindsay.300h@xxxxxxxxxxx>]

You know I have a seventy' birthday on the 25th, and they say your memory is the 2nd thing to go on you, but I can't remember what was the first. I was thinking 62-dumb me.
  ----- Original Message ----- 
  From: Keith Boonstra 
  To: Jerry Lindsay 
  Cc: Ron Waters ; Chrysler300@xxxxxxxxxxxxxxx 
  Sent: Tuesday, July 13, 2010 1:35 PM
  Subject: Re: [Chrysler300] 1958 300D Armrest Support


  No Newports those years.  But if you mean Saratoga, that takes a different arm rest than the NY & 300 2HT and Convertible.

  Keith

  -

  Jerry Lindsay wrote: 
    I believe you can throw in the Newport's as well as using the same armrests as the 300's.


    Jerry Lindsay
    Seminole, Fl                     Getting ready to head up to Mark Souders area (Quakertown, Pa Holiday Inn Express) on the 21st  until the 30th.
                                           Arriving the 22nd.
      ----- Original Message ----- 
      From: Keith Boonstra 
      To: Ron Waters 
      Cc: Chrysler300@xxxxxxxxxxxxxxx 
      Sent: Tuesday, July 13, 2010 1:06 PM
      Subject: Re: [Chrysler300] 1958 300D Armrest Support


        
      Ron,

      I'm nearly positive that the part is not used on the Plymouth line at 
      all. Perhaps some member can confirm this. But the armrests used on 
      the 300 are identical to the ones on New Yorker 2 door hardtops. They 
      were often a color other than beige, but they are the same molding. We 
      would make them in beige and they can be painted for different colored 
      New Yorkers.

      Keith

      -

      Ron Waters wrote:
      > 
      >
      > Hi Keith (and everyone else) -
      >
      > Is the Armrest Support that we are talking about the same as the one used
      > for 57/8 Furys ? If so, maybe we should see if there's any interest 
      > amongst
      > the members of the Golden Fin Society or the Forward Look website. We 
      > should
      > do this once we have a decent prototype and are at the ordering stage. I'm
      > thinking that the more orders that are placed, the lower the cost would be
      > for everyone.
      >
      > Just my 2 cents.
      >
      > Ron
      >
      > 

      [Non-text portions of this message have been removed]



      

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx


To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx


For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/