[Chrysler300] drilling through carpet

["Fern" <crc@xxxxxxxxxxxxxxx>]

Having been in the two way radio business for many years, I know just what it's like to try and drill thru a carpet especially the packing and breaking lots of bits. I use a very sharp tappered punch to make the hole thru the floor and then have no problem getting my self tapping screws attached to the floor.
    Just my 2 cents worth.    Fern

> 
> I don't ever use a drill near carpet. For automotive carpet, I either cut the hole with a knife or use a soldering iron with a cutting tip or just an old tip to melt through and leave a nice edge that won't fray. 
> 
> Ryan Hill 
> 
> 
> 
> 
> 


[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/