[Chrysler300] use of brake proportioning valve

[Tom Chvapil <tchvapil@xxxxxxxxxxxxx>]

Hope I don't get yelled at, but it is related to the proportioning valve. The only thing is, I have installed one on a 57 Jag last year, with front discs and rear drums, retaining the original MC. I don't see why it would be different for a 300.....
I have used Wilwood  valve, and even though it took a bit longer to install and route the new lines to it, it is placed under the steering wheel, out of sight, BUT within the driver's reach, for tweaking while driving. It took just seconds to optimize it, on dirt road. 

Tom Chvapil
Tucson,Az
tchvapil@xxxxxxxxxxxxx




------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/