Re: [Chrysler300] rear jet removal AFB

[paul <paulholm@xxxxxxxxxxxxx>]

On 2/6/2011 12:26 PM, Dave Dumais wrote:
> I am working on a AFB carb, purchased from club member, in real good shape!

> The rear jet slots will not come out.  I would like to install larger jets, but am hesitating to drill into the existing ones, due to not removing all chips from any passages.

> The larger screw driver blade will not grab the slots,just makes it worse.  Any thoughts on removal?

> Dave in mild Va.

did anyone mention the chance that a sharp rap or 3 with a light hammer 
tapping the screwdriver as it sits held firmly in the slot might help 
loosen the jet??  applying a slight twist to it might also help as one 
taps the screwdriver handle, make sure you stay very vertical if you try 
this!

-- 
Paul Holmgren
Mine: 2 57 300-C's in Indy
Hers: 05 PT GT R/T HO Stage 1
Hoosier Corps L#6


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/