Re: [Chrysler300] rear jet removal AFB

["Warren Anderson" <wranderson@xxxxxxxxxxxxx>]

  I am working on a AFB carb, purchased from club member, in real good shape!
  The rear jet slots will not come out.  I would like to install larger jets, but am hesitating to drill into the existing ones, due to not removing all chips from any passages.

  The larger screw driver blade will not grab the slots,just makes it worse.  Any thoughts on removal?

  Dave in mild Va. 

  Snap On tool S6180 has a square end that fits jet slots very well. It is a tool for Dzus fasteners but the square end fits jets.

  BTW, AFB carburetors I have seen have been plenty heavy in the secondary jet area.

  Warren Anderson

  Sedona,AZ. 


[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/