Re: [Chrysler300] starter question

["Sheldon C. Wotring" <swotring@xxxxxxx>]

If it clicks when you try to engage the starter it is neither the 
neutral safety switch nor the vacuum switch on the manifold
Take something hefty like jumper cables or a pliers and jump across the 
two heavy wires in the starter relay. (the small box on the inner fender).
If that causes the starter to run the relay is bad. If it doesn't spin 
the starter then check the battery cable connections.
Remove and clean them. Sometimes the cable will corrode inside the 
battery terminal .
these conditions will sometimes allow the lights, etc. to operate but 
will not carry the heavy starter current.
Sheldon
PA



[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/