Re: [Chrysler300] frequency of oil changes
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] frequency of oil changes



Larry:
 
I've been running the marine 2-cycle oil in all our vehicles for a rew years now.  In a couple of them, the improvement in engine smoothness and mileage was very noticeable.  My wife's Lincoln Town Car really likes the marine oil with the TC-W3 package. It is getting noticeably better mileage and it runs smoother. 
 
My '65 Harley ElectraGlide runs better too.  It runs and feels like it feels when the air outside is really cold.
 
The electric fuel pump in my 2002 Camaro Z-28 Police runs quieter and the mileage in that car was quite good on a trip to South Carolina two years ago.  I did not run less than 75 mph, and I calculated a bit over 26 mpg with the last fill up before arriving home. 
 
I feel that the extra bit of lubrication that the marine 2-cycle oil provides in the fuel system is a very positive property, and the lubrication provided to the valves and the ring pack improve combustion - hence the smoother running engines in my "fleet."
 
I have been buying the marine 2-cycle oil by the gallon at WalMart  (their house brand).  I think it runs about $13.00 or so around here.  The Penzoil brand referred to in the LS1 "Been Testing" article is much more expensive.  As long as you run a 2-cycle oil with the TC-W3 package, you are good to go.
 
BTW, I recommended the TC-W3 regimine to a friend of mine who put in the gas tank of his wife's car - and didn't tell her.  A week later his wife asked him if he did something to the car, because it was running much better. . .
 
I know this is all anecdotal evidence, but I am certainly convinced. Try it.  You'll like it. And you can't hurt anything.
 
Rip


________________________________
From: Larry Jabin <larry@xxxxxxxxxx>
To: CAROLL RIPLEY <ripinator@xxxxxxxxxxx>; Steve Albu <saforwardlook@xxxxxxxxx>; Jim Kelly <gmman4@xxxxxxxxx> 
Cc: "chrysler300@xxxxxxxxxxxxxxx" <chrysler300@xxxxxxxxxxxxxxx> 
Sent: Sunday, February 24, 2013 9:28 AM
Subject: RE: [Chrysler300] frequency of oil changes

  
Rip

Could you tell us more about your results with adding this oil to the fuel

Thank You

Larry

From: mailto:Chrysler300%40yahoogroups.com [mailto:mailto:Chrysler300%40yahoogroups.com] On Behalf Of CAROLL RIPLEY
Sent: Sunday, February 24, 2013 3:50 AM
To: Steve Albu; Jim Kelly
Cc: mailto:chrysler300%40yahoogroups.com
Subject: Re: [Chrysler300] frequency of oil changes

Steve:

Regarding our crappy fuel and ethanol, you may want to check out the info in the following link from the LS1 forum:

http://www.ls1.com/forums/f48/been-testing-91206/

I have been using marine two-stroke oil (one ounce to every five gallons) in all my cars for several years now, and it works very well.

Please ignore some of the colorful language you may encounter over at LS1. . .

Rip

________________________________
From: Steve Albu mailto:saforwardlook%40gmail.com>
To: Jim Kelly mailto:gmman4%40yahoo.com>
Cc: "mailto:chrysler300%40yahoogroups.com"; mailto:chrysler300%40yahoogroups.com>
Sent: Sunday, February 24, 2013 12:26 AM
Subject: Re: [Chrysler300] frequency of oil changes

Interesting that you ask that question, as I also had the same one and
decided to call the technical support folks at Valvoline and Shell about
it. The answer I got was that if the oil isn't dark looking, don't waste
your money on changing the oil. The tech guys said that contamination
causes the brownish to black evolution of used oil colors that take place
over mileage and time. Contamination can come from carbon particles from
the combustion process and minute rust particles from excess humidity in
given climates that can materialize in both the crankcase and fuel tank. I
live in California and drive my cars seldom and the humidity is typically
low, and with being garaged all the time, I can go 5 years or so without
any effects at all. When the oil starts to get a little brown, I usually
decide to change it even though it could probably go much longer.

What is more problematic to me is the crappy ethanol laden gasoline that
turns to varnish in something like a year even under ideal conditions,
leaving my needle/seats in the float mechanism stuck open or stuck closed
when I go to try and start a car after letting it sit for a long period of
time. Thus the car will either not start or the engine will flood quickly,
and can lead to hydraulic lock up and engine damage if the cylinders fill
up with too much gasoline. And then the accelerator pumps don't work
either because that needle sticks closed too. hear that Stabil has a newly
formulated product that should greatly diminish these effects, but I have
not tried it yet. Does anyone have a solution to this problem or
experience with the new Stabil? I will need to drive my cars more often
and change the fuel more than once per year to keep things working well.
But then what do I do with the used fuel? So much for ethanol in gasoline
- a bad idea at best.

Steve Albu

On Sat, Feb 23, 2013 at 1:51 PM, Jim Kelly mailto:gmman4%40yahoo.com> wrote:

> **
>
>
> we are getting closer to the time of starting up our collector cars that
> have been in storage. I own several. i drive each one about 100 miles per
> year, sometimes even less. i use valvoline vr1 racing oil. when i store
> them away in the fall, i don't start them up until spring. my question:
> with this scenario, how ofter should i change the oil. if i change the oil
> every year, it comes out looking like honey. i am assuming i am just
> throwing money out the window by changing oil so ofter. any suggestions on
> how ofter i should change the oil in these cars? thanks in advance, jim
>
> [Non-text portions of this message have been removed]
>
>
>

[Non-text portions of this message have been removed]

------------------------------------

To send a message to this group, send an email to:
mailto:Chrysler300%40yahoogroups.com

To unsubscribe from this group, send an email to mailto:bob%40simplexco.com or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]




[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.