[Chrysler300] A/C clutch bearing

["David Schwandt" <finsruskw@xxxxxxxxxxxxxxx>]

Same thing happened to my on the F several years ago and it was the
compressor locked up and that's what caused the clutch to burn up. Bearing
was good yet A/C was on at the time.

 

Also had that same failure on a K back in 77 and that time the vibration
dampner gave up 1st.

 

That should be a common bearing  #2019-681  NAPA #2062 in my '85 NAPA cross
reference book Probably a bit pricey though if I recall

 

Dave Schwandt

 



[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/