Re: [Chrysler300] 1963 Chrysler 300 Gearbox rebuild
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 1963 Chrysler 300 Gearbox rebuild



HI MARK;
I have a complete 62-64 Steering Column from Steering Wheel to the Pitman
Arm.
I am coming to the Meet and can bring it with me if you can pick it up
there.
I don't see that you are coming to the meet, it is in your state, shame not
to at least drop by.
Let me know if you re interested. $75.00 delivered to the meet.
Ray Jones
Mena, AR


On Sat, May 11, 2013 at 3:50 PM, Mark Lindahl <mplindahl@xxxxxxxxxxxxx>wrote:

> **
>
>
> Hi All,
>
> I have been reading the past emails regarding gearbox rebuilding and it
> seems that the standard rebuild (not firm) is the best for most drivers.  I
> am going to buy a used gearbox, have it shipped out, and then replace the
> one in my 300.
>
> How does one determine that excessive play in the steering is the
> gearbox?  Is there a check list that I should go through first, just to
> make sure the gearbox rebuilding is needed?  I realize the gearbox is 50
> years old and has never been touched.
>
> The centerlink and ball joints have been replaced.  I have tried to clean
> up the sloppy play by tightning the screw on the gearbox, but it did not
> seem to have my effect.  I think there was some caution statement in the
> service manual to not tighten this screw too much.  Any idea what is the
> right amount?  I also see a bit of fluid around the screw, so maybe there
> is a slight leak?  I assume this is not normal.
>
> 300ly,
> Mark Lindahl
> '63 300 Conv.
>
> [Non-text portions of this message have been removed]
>
>  
>



-- 
*Ray Jones. Y'all come on down an see us. Ya hear?*


[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.