Re: RE: [Chrysler300] wheel sizes for Chrysler cars

[<zzub@xxxxxxx>]

I have 17" aluminum factory 2007 Chrysler 300 rims on my 64. I had to use adapters because the 2007 wheels are designed for disc brakes. I  have since installed SSBC disc brakes on the front and no longer need the adapters on the front. Rear wheels still have drums and the adapters. 300 regards...George Ver Berkmoes

---- John <spiers@xxxxxxxxxxxxxx> wrote: 
> Hi all,
> I trial-fitted 17" stock steel rims from a 2006 300 on my '64. The offset was incorrect, and the rims did not set far enough out to the wheel well, as if they were too narrow .  .  . and the wheels fouled the AAJ front disc brake conversion. 
> Note: the bolt pattern on a current 300 is 115mm...4.5 inches on our Letter Cars equals 114.7mm.
> My 300 cents' worth.
> John Spiers
> K
>


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo Groups is subject to:
    http://info.yahoo.com/legal/us/yahoo/utos/terms/