[Chrysler300] Is Chip Loree out there

["Gary Nelson" <gnelson@xxxxxxxxxxxx>]

Is Chip Loree out there. your mail keeps coming back "undelivered"

 

 

 

 

-----Original Message-----
From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx]On Behalf Of John Grady
Sent: Friday, January 31, 2014 2:57 PM
To: 'Dan Akol'; Chrysler300@xxxxxxxxxxxxxxx
Subject: RE: [Chrysler300] Replacement for the 413

 

You might be getting into 426 piston sizes , which is OK , --If mine I would have .060 block sonic checked for wall thickness , might be OK 10 or 20 more (piston size issue, core shift issue ) =my .02.

Or go 440 , no real problems , beyond using right crank for transmission you have , which might lead to need to balance assy

John

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Dan Akol
Sent: Friday, January 31, 2014 1:00 PM
To: Chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] Replacement for the 413

The 413 in my G is .060 over and worn out, so I need a new long block at the least. Question: How does the 440 run with the cross rams? Or should I try to find a 413? Thanks! Dan

__._,_.___

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___