|
The driver’s door on my G is hitting the latch a little low and some upward motion is necessary to get it to fully close. Looks like there may be some play at the hinge. I looked through the archives and noticed the following as a recommended set of parts for rebushing and a new hinge pin: “The manufacturer is Counterpart Automotive and it has two part numbers on it 55-46335-S and 60-46335-S Fits 1955-91 Truck 1955-60 Full size passenger car 1970 -81 Camaro.” This was in the context of an earlier 300 model. Is rebushing and a new hinge pin the conventional wisdom on dealing with a loose hinge? What else should I be looking at to diagnose the situation? Anyone know if the above is useable on a G? I notice NAPA has several similar sets but of course none are specified for a G. Any advice on a suitable part would be appreciated. Thanks. __._,_.___ Posted by: "Rick Vitek" <rpvitek@xxxxxxxxxxxxx> To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang __,_._,___ |
Back to the Home of the Forward Look Network
Archive Sitemap